ВПП / ВППУ / ВПВ

General information

Installation wires ВПП, ВППУ, ВПВ are designed for installation of submerged motors that continuously run in water and artesian wells to electrical networks at a rated AC voltage of 380, 660 and 3000 V with a frequency of 50 Hz. Operating conditions for submerged motors to be connected: maximum pressure – 7,09•106 Pa (kgs/cm2), environment temperature – from -40 to +65 °С (ВПП wire); maximum pressure – 1,7•107 Pa (kgs/cm2), environment temperature – from -40 to +80 °С (ВППУ wire)

Installation wires for submerged electric motors that continuously run in water and artesian wells

STRUCTURAL DESIGN

  1. Conductor: Copper
  2. Insulation: Polyethylene
  3. Outer jacket: Polyvinylchloride or polyethylene

Technical parameters

Nominal cross-sectional area, mm2

Rated voltage, V

380

660

3000

Outer diameter, mm

1.5

2.5

4.0

6.0

10.0

16.0

25.0

35.0

50.0

70.0

5.61

6.12

6.89

7.48

8.63

10.4

12.5

13.4

15.1

16.9

5.83

6.34

7.11

7.70

9.76

10.8

12.9

13.8

15.5

17.3

-

-

-

-

-

-

13.0

14.0

-

-

     

 

TECHNICAL SPECIFICATIONS

  • Warranty period from the date of putting the wires into operation: 2.5 years
  • Service life: 6 years