SF/UTP Cat 6
General information
Cable consists of twisted pairs screened by a crossed isolator, a protective PET tape, a drain wire, and an aluminum opolymer tape screen. Core screened by an aluminum opolymer tape screen is sheathed with tinned -copper wire and outer protective jacket covers the screen core. Category: 6.
Materials:
Conductor: soft copper
Insulation: high-density polyethylene
Outer protective jacket: PVC/LSZH (grey)
Screen: aluminum polymer tape and tinned copper wire
Drain wire: tinned copper wire
STRUCTURAL DESIGN:
- Drain wire
- Crossed isolator
- Twisted pair
- Foil screen
- Armor
- Outer jacket
TECHNICAL SPECIFICATIONS:
- Diameter of copper core: 0.57 mm (AWQ)
- Outer diameter of a cable: 8.0 ± 0.2 mm
- Minimum bend radius: 10хD mm (D- outer diameter of a cable)
- Temperature range of operation: -20 °С / +60 °С
- Standard length: 305±5 m
AREA OF APPLICATION
These cables support the following systems: 10 Base-T4, 100 Base-TX, 100 Base-VG-ANY- LAN, ATM 155 Mbps, ATM 622 Mbps, 1000 Base-T, 10 GBase-T.
FREQUENCY SPECIFICATIONS:
Frequency, MHz | RL | Attenuation, dB | NEXT, dB | PSNEXT, dB | ELFEXT, dB | PSELFEXT, dB |
1.0 | 20.0 | 2.0 | 74.3 | 72.3 | 67.8 | 64.8 |
4.0 | 23.0 | 3.8 | 65.3 | 63.3 | 55.8 | 52.8 |
10.0 | 25.0 | 6.0 | 59.3 | 57.3 | 47.8 | 44.8 |
16.0 | 25.0 | 7.6 | 56.2 | 54.2 | 43.7 | 40.7 |
20.0 | 25.0 | 8.5 | 54.8 | 52.8 | 41.8 | 38.8 |
31.3 | 23.6 | 10.7 | 51.9 | 49.9 | 37.9 | 34.9 |
62.5 | 21.5 | 15.4 | 47.4 | 45.4 | 31.9 | 28.9 |
100.0 | 20.1 | 19.8 | 44.3 | 42.3 | 27.8 | 24.8 |
200.0 | 18.0 | 29.0 | 39.8 | 37.8 | 21.8 | 18.8 |
250.0 | 17.3 | 32.8 | 38.3 | 36.3 | 19.8 | 16.8 |
ELECTRICAL SPECIFICATIONS:
Maximum conductor resistance at a temperature 20 °С | 95 Om/km |
Resistance unbalance between twisted pairs | |
Capacitive unbalance to earth at a frequency of 1 kHz | 160 pF/100 m |
Wave impedance at a frequency of 1-100 MHz | 85-115 Om |
Maximum operating capacity | 5.6 nF/m |
| 20° C temperaturda keçirici damarın maksimal müqaviməti | 95 Om/km |
| Burulmuş cütlər arasındakı omik assimetriya | <4% |
| 1 kHs tezlikdə burulmuş cütün yerə nisbətən tutum assimetriyası | 160 pF/100 m |
| 1-100 MHs tezlikdə dalğa müqaviməti | 85-115 Om |
| Maksimal işçi tutum | 5.6 nF/m |
